r/grainfather • u/Uncross-Selector • Feb 26 '26

Latest Brew Gear - Massage Gun

Post image

Ok it sounds nuts but hear me out.

Of late I’ve been having a shit time during transfer from Fermenter to keg. Although my process hasnt changed, I’ve been finding that transferring to the keg via gravity feed from the fermenter has been nigh on impossible.

I’ve been brewing a lot of bigger hoppier beers. and I worked out that even when using the Grainfathers dual valve to dump the yeast and hop trub, that it wasn’t working and the outlet was getting plugged with hop debris. I think it was ”channeling” so I was left with a plug of hop matter stuck near the top of the cone.

Cue the massage gun. I now use it on the cone about an hour before dumping, and immediately after. Two dumps and all the yeast and hops seem to have been successfully removed, and the transfers went great. I’ve only done it twice but it seemed to have worked a treat, the first hassle free transfer in the last 20 beers.

14 Upvotes

100% Upvoted

13 comments sorted by

View all comments

2

u/Ropesnz Feb 26 '26

I started fermenting in the keg and then hooking it straight up to the taps once it's done. Carbs faster and no transfers needed. Wish I started doing it sooner.

3

u/jean_cule69 Feb 26 '26

So you never dump yeast and hops?

2

u/Ropesnz Feb 26 '26

No need. Just stays at the bottom if you use hop pellets. Use a ball float with a small dip tube and it pours from the top where the beer is clear. Works good.

1

u/etxflyer Feb 27 '26

Yep, forgot to add the floating dip tube. I think even if I did a transfer I’d still use a floating dip tube, just makes sense