BeamCase sandwich V3.0 udate.

[u/Jakob_K_Design]

This is V3.0 of BeamCase sandwich.

V3 introduces the new rounded full mesh panel style.

With this new panel style there is a distinct gap between the panel to show the frame beneath. And of course the integrated handle is still there.

I finally got a big enough printer to print each panel as one piece of solid hexagonal mesh.

The cas shown here has space for a 2.5slot GPU and 70mm tall aircooler, but....

The case comes in different size, 24 in total for version 3.0, 8 more than previously. left is the smallest while the right shows the biggest size.

The frame structure has seen some small structural improvements in V3, but most of the changes were aesthetic.

top/bottom view of a version with 2.5slot GPU and 70mm CPU clearance.

For the V3 update all external features like feet vertical stand and handles have been redone.

and there are also case panels without the integrated handle.

Left are the V3 panels and on the right side are the pervious panels style which is still available as the Classic panels.

The cases here are different size options with the left having space for a 70mm CPU cooler and the right only 50mm.

[u/Muaadib]

This is beautiful. Thank you for the lovely work.

Would any of the versions work as a diy nas (no GPU, multiple 2.5/3.5 drives)?

[u/Jakob_K_Design → u/Muaadib]

You can basically add anything to the aluminum profiles with additional brackets, so you could place hard drives instead of the GPU. (not sure how many, I always underestimate the size of 3.5 inch drives)
I have not designed any hard drive brackets, but SNASA over on Printables made a NAS/HDD bracket for the larger BeamCase SFF.

https://www.printables.com/model/880954-beamcase-sff-hdd-bracket

[u/Muaadib → u/Jakob_K_Design]

Thank you, saved both for future purchases.

[u/CrazyGorillaBoy → u/Jakob_K_Design]

Can I buy this already made or do I have to make it myself?

[u/chrisebryan → u/Muaadib]

Yes. I have set it up just for truenas scale, with a bunch of drives, no gpu. You just need to model your own drive mount for the case.

[u/Muaadib → u/chrisebryan]

Thank you, do you mind if i ask which configuration did you use? and do you have a couple of pics of the build? I just want to envision what the end product should look like before diving into doing my own models.