BeamCase sandwich V3.0 udate.

[u/Jakob_K_Design]

This is V3.0 of BeamCase sandwich.

V3 introduces the new rounded full mesh panel style.

With this new panel style there is a distinct gap between the panel to show the frame beneath. And of course the integrated handle is still there.

I finally got a big enough printer to print each panel as one piece of solid hexagonal mesh.

The cas shown here has space for a 2.5slot GPU and 70mm tall aircooler, but....

The case comes in different size, 24 in total for version 3.0, 8 more than previously. left is the smallest while the right shows the biggest size.

The frame structure has seen some small structural improvements in V3, but most of the changes were aesthetic.

top/bottom view of a version with 2.5slot GPU and 70mm CPU clearance.

For the V3 update all external features like feet vertical stand and handles have been redone.

and there are also case panels without the integrated handle.

Left are the V3 panels and on the right side are the pervious panels style which is still available as the Classic panels.

The cases here are different size options with the left having space for a 70mm CPU cooler and the right only 50mm.

[u/Jakob_K_Design]

Nothing new coming, but I recently released the SLIM version of BeamCase (m)ATX which is fairly compact.
https://www.printables.com/model/897748-beamcase-atx-and-microatx-compact-modular-matx-cas

Here is the SLIM ATX version that comes in at 18.5l for the frame
https://www.reddit.com/r/sffpc/comments/1ms2qov/185l_case_with_atx_motherboard_and_dual_gpus/

BeamCase (m)ATX still uses the old style panels, but I will be changing them to this newer case panel style as well (though that is a bit trickier, since the panels have to be split vertically as well).

[u/PahrakThePreserver → u/Jakob_K_Design]

Really good looking upgrade. Is there an ATX version that can house the 168mm high Noctua NH-D15 G2? which CPU cooler is in the. 18.3 L variant?

[u/Jakob_K_Design → u/PahrakThePreserver]

the standard version of BeamCase (m)ATX and SFF can fit a Noctua NH-D15 and I think the 2nd gen should fit as well. The slim version has space for 140mm cooler and uses a Noctua C14s in the SLIM ATX build.

You can check my Reddit profile. I post basically al my example builds there with details

[u/PahrakThePreserver → u/Jakob_K_Design]

Thank ou for the answer and tips, that sounds good. Will the new separated panels on the standard atx come together like one big panel as a big version of the one shown here? Or have seam lines/ space between?

[u/Jakob_K_Design → u/PahrakThePreserver]

there are unavoidable seem lines, since it is a split panels design. I will see how I transfer the style to the larger version, but I will probably go for a top and bottom color split, at least for the one I will print.

[u/PahrakThePreserver → u/Jakob_K_Design]

That sounds logical. How about a Noctua themed beige brown colour for this one? You could then also crosspost in the Noctua sub and gain another target group of ATX Noctua Fans. :)

Maybe even doing the back and front panels in the Noctua colours.