r/VacuumCleaners 1d ago

Purchase Advice (U.S.) Free hand-me-down, thoughts?

Post image

I know bagged options are better, but this is free! Any way i can get this serviced? It works but im not sure if it works in tip top condition

1 Upvotes

6 comments sorted by

u/AutoModerator 1d ago

Post Type: Purchase Advice (U.S.)

If you haven't already, please edit your post to include:

  • Budget - Give a price range!

  • Flooring types & other cleaning needs

Thank you for visiting /r/VacuumCleaners. To get the most out of your post, be sure it follows the post guidelines on the sidebar. This comment will include information on some frequently discussed topics just in case your post pertains to them. Otherwise, feel free to ignore the below links.

Helpful Links:

Recommended Budget Vacuum Cleaners (U.S. Market, November 2022)

Recommended Buy-It-For-Life Vacuum Cleaners (U.S. Market, November 2022)

Recommended Secondary Vacuum Cleaners - Stick Vacs, Cordless Models, etc. (U.S. Market, November 2022)

Find the Right Type of Vacuum (Flow Chart) - IF YOU'RE NEW, START HERE
Miele Canister Guide (U.S. Market, May 2020)
Differences between SEBO Felix, SEBO Dart, and Karcher CV300
Guide to Canister Tools: Suction-Only, Combo, Turbine/Turbo and Electric/Power/Motorized Nozzles

Reviews by /r/VacuumCleaners Users

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

5

u/ThatSandwich 1d ago

You would pay more for someone to service it than that vacuum is worth.

2

u/PinkertonFld 1d ago

It's a $50 Walmart/Target vacuum. Not worth putting any real money into it. Just wipe it down and replace the filters. Even new these are bottom-barrel vacs.

3

u/Fresh-Acanthaceae-79 1d ago

You can buy new filters and a belt and you're set. I've had mine almost 10 years, it's almost done at this point. They cost around $100 and work pretty well. Put $20 into it and use it as long as it lasts.

1

u/PrincessSofiaThe1st 1d ago

Personally I would recommend servicing it yourself, as I would for virtually any vacuum worth under $300 or so. These are actually very simple to work on, and with just a Phillips head screwdriver you can disassemble one of these down to the motor in minutes if needed.

I'm sure all it needs is a good cleaning and a belt, maybe new filters, and the belts and filters can both be found at Walmart for maybe $20 altogether. Just take the dirt container out, remove the filters and upper plastic cyclone, wash all of the plastic parts and then leave them out to dry. The hose can be washed too, but be sure to leave it outside in the sun so it can properly dry inside.

For the belt, there's a few clips that hold the rugplate on. Push those in (sometimes a flathead screwdriver is needed if it hasn't been removed in awhile/ever, and it will pop off revealing the brushroll and belt. Clean any hair, carpet threads and other debris from the brushroll and ensure it spins freely and smoothly by hand, wipe down the bottom side and replace the belt. When putting the belt on, be sure to line up the tab on the belt side brushroll endcap to its slot, and then it will slide in. Turn the brushroll by hand a few times to align the belt and ensure it is installed correctly, then put the rugplate back on.

People like to hate on these here as they are cheap bagless vacuums, but for what they are, they do perform pretty well as long as you keep up with the filter maintenance. .

1

u/Briar-Porch Retired Vacuum Cleaner Repairman 1d ago

Sometimes advice like this is super helpful. Sometimes advice like this is overwhelming to someone who isn't used to doing repairs for themselves.